MultiSens Personal four-gas detectors that by diffusion allow the simultaneous measurement of up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). Among its features, it stands out the 2 months of autonomy in continuous operation or 6 months in 8-hour shift, thanks to its ultra-low consumption infrared sensor for the explosivity of hydrocarbons. Widely used in exploration, entry into confined spaces, occupational exposure to hazardous materials, mining. The MP400 model is the portable version for up to 5 gases including Volatile Organic Compounds (VOC) and CO2.

ClipSens is the disposable version of a single gas (O2, H2S or CO) and the MP100 series is the single-gas detector for exotic gases, such as Ozone, very useful in detection of contamination by UV disinfection against Covid19. has a wide range of electrochemical sensors available. Reliable performance. This handheld gas detection device provides powerful audible, visual, and vibration alarms. ATEX Zone 0 certified with IS & IP 67.

NEO PID most advanced wireless manual VOC monitor with ppb measurement. It offers various models in the range from 1 ppb to 15,000 ppm and a specific version for benzene (NEO BENZ). It is smaller, lighter and more stable with a 24-hour autonomy and is ATEX certified

Gas detection colorimetric tubes for the measurement of concentrations of specific compounds, due to their simplicity, flexibility and specificity. Available from NH3, H2S, SO2, Cl2, PH3, HCl, HCN, CO, CO2, O2, C6H6, alcohols, amines, mercaptans, and many other gases and vapors, they are low maintenance and handle a 50 or 100 pump volume. DC.

Narrow Tubes

The single stroke air sampling pump has a tube breaker and fragments container, and is guaranteed for 5 years. Uniphos tubing and pumps are compatible with RAE Systems LP-1200 / Sensidyne™ / Gastec ™ GV100 & 800 and Kitagawa™ 8014-400a pumps. Tubes from these manufacturers are also compatible with the Uniphos sampling pump.

Composting probe for taking gas samples from composting piles in aerobic fermentation processes during the maturation of organic matter. The O2 concentration is monitored to determine that the chemical reactions are correct. Built in 150 cm long stainless steel, it is complemented by a portable oximeter and suction probe for on-site analysis of O2 levels. It is complemented by the SENCOM analyzer, made up of an NDIR sensor for CO2 and high-precision electrochemical cells for O2 and NH3, which includes sample conditioning for analysis.

Fixed Detectors

iSens wireless environmental gas sensor with LoRa technology for perimeter monitoring, decontamination, remediation of contaminated soils and occupational exposure. It uses a wide range of sensor types to achieve a wide variety of configurations, allowing the reading of the measured gas to be transmitted to the GasVisor control unit for fast and accurate measurement of all types of gases. Easy plug & play installation, with internal battery for autonomy of two years for electrochemical sensors, or powered by 110-220 VAC for PID, IR or catalytic sensors. They can be connected in a network or via SensoGuard software. With line of sight signals can be transmitted up to 7 km.

Sensotox 2 ATEX fixed transmitter for detection of toxic, flammable gases, Oxygen and VOCs with 4-20 mA output and RS485 with Wireless option. It uses a wide range of sensor types to achieve a wide variety of configurations, connected as a 4-20 mA transmitter or in a Modbus RS485 network of up to 128 sensors. It incorporates an optional display, status leds and alarm relays and/or a wireless modem to transmit the reading and alarm signals to a remote central, eliminating wiring. It optionally has a non-intrusive adjustment using magnets.

SILOTEC®, from ENOTEC GmbH, for continuous InSitu ATEX Zone 20 safety monitoring in coal silos and other materials in atmospheres containing potentially explosive dust. The simultaneous measurement of O2 and COe makes it possible to detect smoldering fires and inertization triggering. The system is 100% maintenance-free and has the necessary IP rating for easy installation on silo roofs.

• Plug & Play
• Simultaneous O₂ & CO_e measuring 
• Self-checking
• Applications: • Coal silos • Flour silos • Sugar silos • Coke silos • Highly explosive dust atmospheres

EnergyTech 401 CO monitoring for the protection of electrostatic precipitators (ESP) and bag filters, minimizing fire risks, increasing both infrastructure and personnel safety. Levels of 500 ppm and higher, may represent an explosion hazard in the ESP and/or bag filters.

The monitor uses NDIR infrared technology, spectroscopy, and GFX to isolate gases of interest. It makes the measurement through the duct in an open path.

Other applications include process control in large-scale of coffee bean roasting, where CO levels must be kept accurate during roasting as they have a direct effect on the flavor of the final product. Optimization of combustion processes, by establishing the air excess requirements at all times for better combustion of fossil fuels with greater efficiency.

EnergyTech 201 from CODEL is the CO/O2 analyzer, it uses electrochemical cells for early smoldering fire detection in coal pulverizer mills, in coal handling systems, thermal plants and in cement plants. It is essential to prevent catastrophic damage and serious injury to personnel.

The analyzer samples gas from critical areas through a sintered filter mounted on the chamber wall, eliminating the need for intrusive sampling probes, and conditioning it in two stages: filtration and cooling for continuous close-range analysis of the processing unit, thus avoiding expensive monitoring point multiplexing systems, which also reduces reliability in latent risk mitigation due to time delays in both remote analysis and necessary purges for reliable monitoring.