Macro-metering with electromagnetic flowmeters of modular Plug & Play design, Model MAGX2 adjustable to all types of applications, from the simplest, most important requirements, to the most demanding, which require a more advanced solution such as GPRS or TCP/IP communication.

Features:

• Accuracy ±0,2% (0,5 a 10 m/s) of the real values
• Self-cleaning of electrodes
• Smart sensor design. The signal is converted from analog to digital in the same sensor and sent to the transmitter in MODUS RTU format
• 4 electrodes: third and fourth electrodes for the detection of empty pipes and grounding
• Errores detection and diagnosis. Any operating error will be reflected on the screen with its respective code
• Bi-directional measurement
• Graphic screen with 6 tactile buttons – multi language menu. Greater protection through the button lock system plus 3 levels of passwords. User, service, factory settings.
• All communications based on MODBUS RTU (only one communication module can be installed at the time)
• BLUETOOTH as communication option
• TCP / IP module allows you to connect to the MAGX2 from anywhere in the world through the internet
• Wireless communication system via GPRS
• Also available RS232, RS485 and USB communications. 

One compact and 3 remote mounting option:

• Internal clock included as standard in all models
• Modules can be easily installed or removed in a few seconds allowing flowmeter configuration to be updated at any time
• Uses a standard Micro Secure Digital data recording card as memory support, compatible with all major manufacturers.
• Available connections: DIN, ANSI, JIS, Tri-clamp, ANSI 11851. Others on request.

Macro measurement with non-intrusive ultrasonic time-of-flight flowmeters model USCX150, high flexibility and performance version with modular design and a wide variety of different types of transducers to make it suitable for water flow measurement and energy flow monitoring.

Specification

• Pipe diameter from 10 mm to 6500 mm
• Temperature range for sensors from –30°C to 250°C (-22°F to 482°F), higher temperatures available
• IP66 in polycarbonate
• Selectable three-line LCD display and a full keypad
• Up to ten input or output slots available
• Measurement of two flows simultaneously

Features

• Dual flow monitoring with sum, average, difference and maximum calculations
• Output options including analog, open collector and relay
• RS 485, Modbus RTU, Profibus PA and HART-compatible output communication options
• Analog inputs for temperature, pressure and density compensation
• Big data logging and software for data sampling and data transfer
• Optional heat quantity measurement functionality (thermal energy)

Applications

• Heating, ventilation and air conditioning (HVAC) measurements
• Measurement of large pipelines with two pairs of sensors in X’ configuration
• Product recognition and interface detection systems
• ATEX measurements, Ex-certified transducers
• Effluent and wastewater measurements
• Automated process control

The USCX100 model is a compact ultrasonic flow transmitter with a robust and practical design for permanent installation and flow measurement in individual pipes. The instrument offers a cost-effective option due to its simplified specification and the availability of a wide range of transducer types.

Specification

• Pipe diameter range from 10 mm to 3000 mm
• Temperature range for sensors -30°C to 80°C (-22°F to 176°F)
• Robust aluminum enclosure IP 66
• Unit with LCD display and five-key keypad
• For wall or pipe mounting

Features

• Low cost
• Process outputs including RS 485, Modbus RTU and HART compatible
• PT100 inputs for measurement of heat quantity (thermal energy)
• Bidirectional measurement with totalizer function
• Innovative installation wizard for fast and intuitive programming
• Configuration can be changed to suit customer needs

Applications

• Water and wastewater meters
• Replacement of electromagnetic flowmeters
• Monitoring and control of air conditioning, heating and ventilation (HVAC) systems.
• Cost-effective solution for large-scale projects
• Automated process control

USCX200 non-intrusive, lightweight and powerful portable flow meter

Specification

• Pipe diameter range 10 mm to 6500 mm
• Temperature range for sensors -30°C to 250°C (-22°F to 482°F)
• Selectable three-line LCD display and a full keypad
• Battery life up to 24 hours with standard NiMH AA batteries

Features

• Lightweight and tactile for easy one-handed use, Weight 650 g
• Standard sensors, cables and connectors in stainless steel
• Innovative installation wizard for fast and intuitive programming
• Instrument diagnostics and span function
• Big data logging and software for data sampling and data transfer

Applications

• Pump testing and inspection
• Verification of flowmeter performance
• Leak and blockage detection
• Monitoring of hydraulic systems

To meet all your water quality detection and monitoring needs in a more practical, affordable and accessible way for everyone.

The portfolio provides fast and accurate detection of water quality variables that are important to processes, every minute, every day. It provides online information on parameters and compounds such as BOD, COD, TOC, DOC, UV254, UVT, nitrates, nitrites, BTEX, OIW, TSS, color, Dyes, chromium VI, permanganate, diesel fuel, benzene, ozone, pesticides, monochloramine, surfactants, black liquor, THM/HAA, spectral fingerprinting and much more.

These solutions contribute to improve the efficiency and optimization of treatment processes with cost savings and better water quality results; they detect events immediately to prevent disturbances, reduce energy and chemical usage, minimize contamination while protecting the environment, obtain compliance assurance and assure the public health, safety and security.

The patented UV254 / UVT Meter leads the way in portable testing of organics. a Operation is simple with accurate and repeatable results obtained in seconds. An optional battery pack allows samples to be taken anywhere, anytime.

Their use contributes to the optimization of the coagulation process, contaminant removal efficiency, UV disinfection performance, among others.

The real-time analyzers, for bypass mounting, with built-in display, provide reliable measurements of organics, color changes according to ISO 6271-2016:05, high levels of Nitrite (NO2) in process water from boilers and coolers as well as in aquaculture.

The free chlorine analyzer provides a continuous and reliable measurement of Free Chlorine, Chlorine Dioxide and/or dissolved Ozone using potentiostatic technology without reagents.

Sensors

Real Tech offers a variety of sensor options guaranteed to configure the right monitoring solution for your sensing needs, budget and application.

The patented algae detection sensor uses multiple LEDs to simply and affordably measure algae (cells per ml) or chlorophyll-a (µg per L) in source water.

The patent-pending BOD/COD and TOC probes and bypass sensor use multi-wavelength UV LED technology for simple, affordable and reliable monitoring of organic matter in wastewater, providing reagent-free TOC measurement.

The ammonium sensor comes complete with a manifold for bypass style measurements and utilizes ISE technology for convenient and affordable continuous monitoring.

The patent-pending probe and bypass sensor for Chromium VI, Benzene, Hydrocarbons and color/multicolor sensors use UV LED technology at various wavelengths for simple, affordable and reliable monitoring in water and wastewater. The permanganate sensor works similarly for determining low residual concentration in drinking water.

Robust TSS total suspended solids sensor uses LED technology for immersion installation enables low maintenance TSS monitoring of wastewater.

The turbidity sensor for submersible or bypass installation uses optical IR nephelometry measurement technology, compatible with ISO 7027.
Conductivity and/or salinity sensors are available in a submersible probe or bypass sensor option and use 4-electrode technology for ultra-low energy, low-maintenance monitoring.

The optical dissolved oxygen sensor is available in a choice of submersible probe or dbypass sensor. ASTM International D888-05 approved technology offers the operator a low maintenance design.
The pH sensor available in submersible or bypass version uses combined electrode technology for low maintenance.